Splinter resistant composite decking is one reason WPC is commonly considered for patios, balconies, poolside areas, gardens and other outdoor spaces where people may walk barefoot.

Natural timber can crack, split and develop sharp wood fibers as it ages.

Composite decking behaves differently.

WPC decking combines processed wood fibers or wood flour with thermoplastic polymers, pigments and functional additives. Manufacturers mix these materials and extrude them into controlled decking profiles.

Because the wood component is incorporated into a composite structure rather than remaining as continuous solid timber, WPC generally does not form traditional wood splinters in the same way.

However, this does not mean composite decking can never suffer surface damage.

Heavy impact, dragging metal furniture, incorrect installation, aggressive cleaning or long-term wear can still cause:

• Scratches
• Chips
• Damaged corners
• Worn embossing
• Cracked edges
• Damaged capped surfaces

Therefore, a more accurate description is:

splinter-resistant composite decking

rather than:

completely splinter-proof decking

This guide explains why WPC reduces traditional timber splinters, what surface wear can still occur and what homeowners, distributors, contractors and project buyers should consider for barefoot, poolside, pet and family applications.

Why Does Natural Timber Splinter?

Natural wood has a continuous fibrous structure.

As outdoor timber experiences moisture, sunlight, temperature changes and physical wear, the surface can gradually change.

Depending on the wood species and condition, timber may develop:

• Small cracks
• Raised fibers
• Splits
• Rough areas
• Sharp splinters

Several factors can contribute.

Moisture Changes

Wood naturally absorbs and releases moisture.

Repeated wetting and drying can cause dimensional changes.

Over time, these cycles may contribute to surface cracking or raised fibers.

Sunlight and Weathering

Outdoor UV exposure can gradually alter the timber surface.

The combination of sunlight, heat and moisture may make untreated or poorly maintained wood rougher over time.

Mechanical Wear

Furniture, foot traffic and outdoor use can damage exposed wood fibers.

Once the surface becomes rough, splinters may become more noticeable.

Lack of Maintenance

Some timber decks require periodic sanding, oiling, staining or sealing depending on the species and outdoor environment.

If the surface deteriorates without maintenance, splinter risk may increase.

Why Is Composite Decking More Splinter-Resistant?

The main reason is its material structure.

WPC is not made from one continuous piece of natural timber.

Instead, wood fibers are processed and combined with polymer before extrusion.

This creates a more uniform composite structure.

Wood Fibers Are Bound Within the Composite

The wood component is distributed throughout the WPC material.

It does not remain as long exposed timber fibers that can separate and form traditional wooden splinters.

Therefore, normal outdoor aging generally produces a different surface behavior from natural timber.

The Polymer Helps Stabilize the Surface

Thermoplastic polymer binds the wood particles together.

This helps create a controlled board surface and reduces direct exposure of individual wood fibers.

As a result, WPC generally provides a smoother and more consistent surface during normal use.

Manufactured Surface Texture

Composite decking surfaces are created during production.

Depending on the product, they may include:

• Straight grain
• Brushed texture
• Grooves
• 3D embossing
• Deep wood grain
• Co-extruded wood grain

This gives manufacturers greater control over surface consistency compared with naturally variable timber.

Does Composite Decking Ever Splinter?

Traditional wood splinters are uncommon with quality WPC decking.

However, buyers should avoid turning this into an absolute promise.

Composite decking can still suffer other forms of physical damage.

For example, a board may:

• Chip at an edge
• Crack after severe impact
• Develop a damaged corner
• Show deep scratches
• Lose part of an embossed surface
• Suffer cap damage

These problems are not identical to natural timber splintering, but they can still create a rough or uncomfortable area.

Therefore, damaged boards should be inspected and repaired or replaced when necessary.

Splintering vs Cracking vs Chipping

These terms describe different problems.

Understanding the difference helps buyers communicate product performance more accurately.

Splintering

Splintering usually refers to long or sharp fibers separating from natural timber.

This is the problem WPC generally reduces significantly.

Cracking

A crack is a fracture in part of the board.

Composite decking can crack under unusual conditions such as:

• Severe impact
• Incorrect support
• Installation damage
• Excessive localized load
• Damaged edges

A crack does not necessarily create traditional timber splinters, but it should still be inspected.

Chipping

Chipping refers to a small piece breaking away from an edge or surface.

Possible causes include:

• Impact
• Rough transport
• Incorrect cutting
• Dropping heavy objects
• Damaged corners

Good handling and installation help reduce this risk.

Scratching

Scratches affect the visible surface rather than the internal board structure.

They are often caused by:

• Metal furniture
• Sand
• Sharp tools
• Construction work
• Dragging planters

Scratches are one of the more realistic surface-wear concerns for composite decking.

Is Composite Decking Safe for Bare Feet?

Composite decking is widely used in locations where people may walk barefoot because it generally reduces traditional wood splinter risk.

Typical applications include:

• Poolside decks
• Residential patios
• Balconies
• Resorts
• Outdoor showers
• Garden seating areas

However, barefoot comfort depends on more than splinters.

Buyers should also consider:

• Surface temperature
• Surface texture
• Water
• Dirt
• Damaged edges
• Slip-related performance

Therefore, “splinter-resistant” should not automatically be interpreted as “safe under every condition.”

Surface Temperature Matters

Composite decking can become warm or hot in direct sunlight.

Dark colors generally absorb more solar heat than lighter colors.

For barefoot poolside or resort projects, buyers may therefore prefer:

• Light grey
• Silver grey
• Teak
• Medium wood tones

Shade can also improve comfort.

Surface Cleanliness Matters

Sand, small stones and debris can make any outdoor walking surface uncomfortable.

Routine cleaning helps maintain a comfortable barefoot surface.

Damaged Boards Should Be Repaired

A broken corner or damaged edge can create a sharp area even when the material does not form traditional wood splinters.

Therefore, high-use barefoot projects should include routine inspection.

Is Composite Decking Good for Poolside Areas?

Splinter resistance can make WPC attractive for pool surroundings.

People frequently walk barefoot around pools, so rough timber fibers can be undesirable.

Composite decking generally reduces this concern.

However, poolside product selection should also consider several other factors.

Surface Temperature

Direct sunlight can make decking warm.

Therefore, color selection is important in hot climates.

Drainage

Water should be able to move away from the deck.

Correct board gaps and substructure design help support drainage.

Surface Texture

The surface should provide suitable characteristics for the intended application.

Deep embossing, brushed surfaces and other textures can feel different underfoot.

Slip-Related Performance

Wet surfaces require additional attention.

Buyers should review relevant product information where slip performance is important.

Fastener Resistance

Poolside environments can expose accessories to moisture and chemicals.

Suitable clips and screws should be selected.

Therefore, splinter resistance is an advantage, but it is only one part of poolside safety.

Is Composite Decking Good for Families With Children?

Composite decking can be a practical outdoor flooring option for family environments because it normally provides:

• Reduced traditional timber splinter risk
• Consistent surface
• Lower routine maintenance
• Good moisture resistance
• Multiple surface textures

Children may sit, crawl or play directly on an outdoor deck, so surface condition is particularly important.

However, parents and project designers should still check for:

• Hot surfaces
• Damaged boards
• Loose fasteners
• Raised edges
• Sharp furniture
• Wet slippery areas

The decking material cannot eliminate every outdoor safety risk.

Rounded and Well-Finished Edges Help

Product finishing matters.

Boards with damaged or poorly cut edges may feel rough even when the main surface is smooth.

Installers should therefore use suitable cutting tools and finish exposed edges correctly.

Hidden Fasteners Can Improve Surface Appearance

Many WPC decking systems use hidden clips.

This reduces the number of visible screw heads across the walking surface.

However, clips must be installed correctly.

Loose boards can create more serious safety concerns than surface texture alone.

Is Composite Decking Suitable for Pets?

Composite decking can also work well in outdoor areas used by dogs and other pets.

Splinter resistance is useful because paws regularly contact the surface.

However, pet owners should consider other factors as well.

Claw Scratches

Pet claws can create visible scratches on some decking surfaces.

The risk depends on:

• Pet size
• Activity level
• Surface texture
• Board color
• Product technology

A scratch does not necessarily affect structural performance, but it can affect appearance.

Dark Surfaces May Show Marks More Clearly

Some scratches or light-colored marks may be easier to see on dark grey or charcoal decking.

Medium wood tones can sometimes make normal wear less obvious.

Heat Matters for Pet Paws

Pets can also be sensitive to hot surfaces.

A dark deck under intense sunlight may become uncomfortable.

Therefore, shaded areas and suitable color selection are useful for pet-friendly projects.

Cleaning Pet Waste

Outdoor pet areas require regular cleaning.

Prompt cleaning helps reduce:

• Odor
• Staining
• Dirt buildup

Capped decking may provide improved stain resistance, but no decking surface should be considered completely stain-proof.

Traditional WPC vs Capped WPC Surface Wear

Surface technology affects how composite decking responds to scratches and wear.

Traditional Uncapped WPC

Traditional WPC exposes the composite material directly at the surface.

Advantages may include:

• Natural composite texture
• Multiple embossing options
• Competitive price
• Good splinter resistance

However, surface scratches or wear may directly affect the composite material.

Capped Composite Decking

Capped or co-extruded decking has an additional protective surface layer.

This can improve:

• Stain resistance
• Moisture resistance
• Color stability
• Surface protection

However, the cap can still be scratched or damaged by heavy use.

A deep scratch may expose the core beneath the protective surface.

Therefore, capped does not mean scratch-proof.

Can Capped WPC Splinter?

Capped WPC generally does not form traditional wood splinters.

However, severe edge damage can chip or break the cap and core.

Any damaged area should be checked before continued use.

Does 3D Embossed Composite Decking Wear Down?

3D embossed decking uses deeper surface patterns to create a more pronounced wood-grain appearance.

Over long-term use, high-traffic areas may gradually show surface wear.

The degree depends on:

• Foot traffic
• Furniture
• Sand
• Cleaning methods
• Product quality
• Surface technology

This does not necessarily mean the board is structurally damaged.

However, the embossed pattern may become less pronounced in heavily used areas over time.

Avoid Aggressive Cleaning

Hard metal brushes or aggressive abrasive tools can damage textured surfaces.

A soft brush and suitable cleaning method are normally more appropriate.

For capped decking, excessive abrasion may also affect the protective layer.

Straight-Grain vs Embossed WPC for Barefoot Areas

Both surfaces can work for barefoot applications.

The better choice depends on the project.

Straight-Grain Decking

Possible advantages include:

• Simple surface
• Easy visual consistency
• Straightforward cleaning

However, groove design and surface texture should still be evaluated.

Embossed Decking

Possible advantages include:

• More natural wood appearance
• Stronger visual texture

However, deep grain can trap more dirt and may feel different underfoot.

Therefore, physical samples are useful before choosing a surface for poolside or hospitality projects.

Does Hollow Composite Decking Splinter?

Hollow and solid refer to the internal profile.

They do not directly determine whether WPC forms traditional timber splinters.

A quality hollow board can provide a smooth, splinter-resistant surface.

However, hollow profiles have exposed chambers at cut ends.

If the end is damaged, the internal ribs or edges can become rough.

Therefore, installers should:

• Cut boards cleanly
• Protect exposed ends where required
• Avoid severe impact
• Inspect edge damage

Is Solid Composite Decking Safer?

Not automatically.

Solid decking contains more material, but it can still:

• Scratch
• Chip
• Heat in sunlight
• Suffer impact damage

Surface safety depends more on product quality, finishing and installation than simply whether the profile is hollow or solid.

What Causes Composite Decking Surface Damage?

Several common situations can damage WPC surfaces.

Dragging Furniture

Dragging metal chair or table legs can create scratches.

Use furniture pads where appropriate.

Heavy Planters

Large flower pots can create concentrated loads.

They can also trap moisture and dirt underneath.

Use suitable supports and move them carefully.

Construction Work

Tools, ladders and building materials can damage newly installed decking.

Protect the surface while other construction work continues.

Sand and Grit

Sand can act as an abrasive under furniture or shoes.

This is particularly relevant in:

• Coastal areas
• Poolside projects
• Outdoor restaurants

Routine sweeping helps reduce abrasive wear.

Metal Cleaning Tools

Aggressive brushes or scrapers may damage surface textures.

Use tools suitable for the exact decking surface.

Sharp Objects

Knives, tools or metal edges can cut or gouge the surface.

Composite decking is durable, but it is not designed to resist every sharp impact.

Can Scratched Composite Decking Be Repaired?

Repair options depend on the type and depth of damage.

Light cosmetic marks may become less noticeable over time or may be manageable according to manufacturer guidance.

However, aggressive sanding is generally not recommended without confirming the product.

This is especially important for capped decking.

Sanding can remove:

• Wood-grain texture
• Embossing
• Protective surface layers

Severely damaged boards may be better replaced.

Why Spare Boards Are Useful

Hotels, resorts and commercial projects may benefit from keeping replacement boards from the original order.

This can help with future repairs.

However, replacement boards may still appear slightly different from older decking that has already weathered outdoors.

Therefore, batch and color management remain important.

How Installation Affects Surface Safety

Material selection alone does not determine deck safety.

Incorrect installation can create larger hazards than splinters.

Correct Joist Spacing

Boards need suitable support.

Excessive joist spacing may increase deflection and movement.

This can put stress on:

• Boards
• Clips
• Side grooves

Therefore, spacing should follow the exact product guidance.

Correct Expansion Gaps

WPC expands and contracts with temperature.

Insufficient spacing can cause boards to push against surrounding structures.

This may create:

• Raised ends
• Distortion
• Uneven surfaces

A raised board can become a trip hazard.

Correct Fasteners

Loose clips or screws can allow board movement.

Hidden clip systems should be installed according to the product design.

Stable Substructure

An uneven or unstable substructure can create differences in board height.

This affects walking comfort and safety.

Proper Drainage

Standing water can make surfaces dirty and slippery.

Drainage therefore contributes to overall deck safety.

Composite Decking Surface Safety for Commercial Projects

Commercial environments usually experience more intensive use than residential patios.

Examples include:

• Hotels
• Resorts
• Restaurants
• Public terraces
• Commercial walkways

These projects may experience:

• High foot traffic
• Furniture movement
• Luggage
• Cleaning equipment
• Outdoor dining
• Weather exposure

Therefore, B2B buyers should evaluate more than splinter resistance.

Hotel and Resort Decking

Important considerations include:

• Barefoot comfort
• Surface temperature
• Scratch resistance
• Stain resistance
• Replacement stock
• Maintenance

Pool areas deserve particularly careful evaluation.

Restaurant Decking

Restaurant terraces face frequent furniture movement and food spills.

Furniture pads and capped surface technology may help reduce visible wear and stain problems.

Commercial Walkways

Higher traffic can gradually wear surface patterns.

Buyers should evaluate the intended application and available mechanical information rather than selecting only by appearance.

Composite Decking vs Timber for Surface Safety

Factor	WPC Composite Decking	Natural Timber
Traditional splinters	Generally low risk	Can occur as timber ages
Surface cracks	Possible under damage	Possible
Scratches	Possible	Possible
Refinishing	Limited	Often easier to sand/refinish
Barefoot use	Often suitable	Depends on surface condition
Surface temperature	Can become hot	Also varies with color/species
Maintenance	Generally lower	May require more refinishing
Surface consistency	Manufactured and relatively controlled	Naturally variable
Edge damage	Can chip or crack	Can split or splinter
Replacement	Individual boards can be replaced	Individual boards can often be repaired or replaced

The comparison does not mean WPC is completely safer in every situation.

Each material has different advantages and limitations.

How to Reduce Surface Wear and Damage

Most surface problems can be reduced through normal care.

Use Furniture Pads

Place protective pads beneath tables, chairs and other movable furniture.

Lift Instead of Dragging

Heavy objects should be lifted rather than pulled across the decking.

Sweep Sand and Dirt

Abrasive particles can increase surface wear.

Clean Spills Promptly

This helps reduce staining.

Avoid Aggressive Tools

Do not use metal brushes or other abrasive equipment unless specifically approved.

Protect the Deck During Construction

Cover newly installed decking when nearby building work continues.

Keep Spare Boards

This is useful for larger projects where future repairs may be required.

Inspect Damaged Areas

Replace badly cracked or broken boards rather than leaving sharp edges exposed.

How Weather Affects Composite Decking Surface Wear

Outdoor decking experiences more than physical traffic.

Weather also contributes to long-term surface change.

UV Exposure

Sunlight can gradually affect:

• Color
• Surface appearance
• Gloss

Capped products generally provide improved color stability, but should not be called fade-proof.

Heat

High surface temperatures can influence user comfort and cause normal thermal expansion.

Correct installation gaps remain important.

Rain and Humidity

Moisture generally does not create traditional timber splinters in WPC.

However, standing water can encourage:

• Dirt
• Algae
• Mold on organic residue

Routine cleaning remains important.

Cold Weather

Low temperatures can change material behavior.

Avoid severe impacts to decking under extreme conditions and follow product-specific installation recommendations.

Why Splinter Resistance Matters for Poolside Projects

Pool projects often prioritize barefoot use.

WPC offers an advantage because it generally does not develop conventional timber splinters.

However, professional buyers should assess several features together:

• Surface texture
• Surface temperature
• Slip-related performance
• Water resistance
• Drainage
• UV resistance
• Fasteners
• Cleaning

This produces a more realistic product specification than selecting based on splinter resistance alone.

Why Splinter Resistance Matters for Pet-Friendly Projects

Dogs and other pets place their paws directly on the decking surface.

A smooth, well-maintained WPC surface can reduce exposure to traditional wood splinters.

However, buyers should still consider:

• Surface heat
• Claw marks
• Cleaning
• Urine or waste
• Stain resistance
• Shade

For pet-focused projects, medium or lighter colors may also improve comfort under strong sun.

Why Splinter Resistance Matters for Family Decks

Family decks may be used for:

• Children’s play
• Barefoot walking
• Outdoor dining
• Sitting directly on the decking
• Pet activity

Reduced timber splinter risk is therefore useful.

However, family-focused design should also include:

• Rounded or properly finished edges
• Secure fastening
• Stable substructure
• Clean walking surface
• Suitable railings where required
• Shade for hot climates

Decking material is only one part of the complete outdoor safety design.

How B2B Buyers Should Evaluate Splinter-Resistant Composite Decking

Importers and distributors should inspect the actual product rather than rely only on marketing claims.

1. Check the Surface Quality

Look for:

• Rough areas
• Uneven texture
• Exposed particles
• Chips
• Bubbles
• Cracks

The surface should appear consistent.

2. Inspect the Board Edges

Check:

• Corners
• Side grooves
• Cut ends

Poor finishing can create rough areas even if the main surface is smooth.

3. Inspect the Cross-Section

For hollow profiles, check:

• Wall thickness
• Internal ribs
• Chamber structure
• Edge quality

4. Check the Surface Technology

Confirm whether the product is:

• Straight grain
• Brushed
• 3D embossed
• Capped
• Co-extruded

Different surfaces may have different wear characteristics.

5. Consider the Application

Ask whether the decking will be used for:

• Poolside
• Residential garden
• Family patio
• Pet-friendly area
• Hotel
• Restaurant
• Commercial walkway

Different applications create different wear conditions.

6. Confirm Joist Spacing

Correct support helps reduce board movement and damage.

7. Review Relevant Technical Information

Depending on the project, buyers may review information relating to:

• Mechanical performance
• Slip resistance
• Weathering
• Water absorption

Technical data should apply to the relevant product or material system.

8. Request Physical Samples

Physical samples are especially useful for this topic because buyers can directly evaluate:

• Surface feel
• Embossing
• Edge quality
• Color
• Profile

For poolside applications, evaluating the sample under both dry and wet conditions can also provide useful practical information.

What Should Buyers Ask the Manufacturer?

Before ordering composite decking for barefoot or high-use environments, buyers can ask:

• Is the surface capped or uncapped?
• What surface texture is used?
• Is the board hollow or solid?
• How should damaged boards be handled?
• What cleaning tools are recommended?
• What joist spacing should be used?
• What expansion gaps are required?
• What fasteners match the profile?
• Is relevant slip-performance information available?
• Can replacement boards be supplied?
• Can physical samples be evaluated before bulk production?

These questions provide more useful information than simply asking whether the board is “splinter-free.”

Common Mistakes When Evaluating Splinter-Resistant Decking

Mistake 1: Saying Composite Decking Can Never Splinter or Break

WPC reduces traditional wood splintering, but physical damage can still occur.

Mistake 2: Confusing Splinter Resistance With Scratch Resistance

A surface can resist timber splinters and still become scratched.

Mistake 3: Ignoring Heat in Barefoot Areas

A smooth surface may still become uncomfortable under strong sunlight.

Mistake 4: Ignoring Wet-Surface Conditions

Poolside safety also depends on drainage and slip-related performance.

Mistake 5: Assuming Capped Decking Is Damage-Proof

The protective cap improves surface performance but can still be scratched.

Mistake 6: Using Aggressive Cleaning Tools

Metal brushes and abrasive equipment can damage the visible surface.

Mistake 7: Ignoring Damaged Edges

A chipped corner should be repaired or replaced.

Mistake 8: Assuming Hollow Profiles Are Unsafe

Hollow and solid describe the internal structure, not whether the surface forms traditional splinters.

Mistake 9: Ignoring Installation

Raised or loose boards can create more serious hazards than surface texture.

Mistake 10: Choosing Only by Appearance

A beautiful wood grain does not automatically mean the board suits poolside, pet or commercial use.

Frequently Asked Questions

Does Composite Decking Splinter?

Composite decking generally does not form traditional wood splinters in the same way as natural timber because the wood fibers are incorporated into a wood-plastic composite structure.

Is Composite Decking Splinter-Proof?

It is more accurate to call WPC splinter-resistant. Severe impact, edge damage or cracking can still create rough or damaged areas.

Is Composite Decking Safe for Bare Feet?

WPC is often suitable for barefoot areas because of its reduced traditional timber splinter risk. However, surface temperature, wet conditions and physical damage should also be considered.

Is Composite Decking Good Around Pools?

Yes, suitable WPC decking can be used around pools. Buyers should evaluate splinter resistance together with surface temperature, drainage and relevant slip performance.

Can Composite Decking Scratch?

Yes. Furniture, sand, tools and sharp objects can scratch the surface.

Does Capped Composite Decking Scratch?

Yes. Capped decking provides improved surface protection, but deep scratches can still damage the protective layer.

Can Composite Decking Crack?

Severe impact, unsuitable installation or other abnormal conditions can cause cracking. A cracked board should be inspected and replaced if necessary.

Can WPC Decking Chip?

Edges and corners may chip after strong impact or poor handling. Correct transportation, cutting and installation help reduce the risk.

Is Composite Decking Good for Children?

It can be a practical family decking material because it generally reduces traditional wood splinter risk. Surface temperature, secure installation and regular inspection are also important.

Is Composite Decking Good for Dogs?

Yes, it can be suitable for pet-friendly outdoor spaces. Buyers should also consider claw scratches, surface heat and routine cleaning.

Does 3D Embossed Decking Wear Down?

High traffic and abrasion can gradually reduce the appearance of deep surface embossing. Suitable cleaning and furniture protection can help reduce wear.

Can You Sand Scratched Composite Decking?

Aggressive sanding is generally not recommended without checking the manufacturer’s instructions, especially for capped decking because sanding can damage the protective surface.

Is Hollow Composite Decking More Likely to Splinter?

No. Hollow and solid describe internal structure. Surface quality and material formulation are more relevant to splinter resistance.

What Composite Decking Is Best for Barefoot Areas?

A well-finished WPC product with suitable surface texture, practical color, appropriate slip-related performance and correct installation can work well. Hot climates may also favor lighter or medium colors.

Conclusion

Splinter resistant composite decking provides a useful advantage over natural timber for many outdoor flooring applications.

Because WPC combines processed wood fibers with thermoplastic polymers, it generally does not develop traditional wood splinters in the same way as aging solid timber.

This makes composite decking attractive for:

• Poolside areas
• Family patios
• Balconies
• Gardens
• Pet-friendly spaces
• Hotels
• Resorts

However, splinter resistance does not mean the decking is immune to surface damage.

WPC can still experience:

• Scratches
• Chips
• Cracks
• Edge damage
• Surface wear
• Embossing wear

Capped decking can improve surface protection, but it should not be marketed as scratch-proof or damage-proof.

For barefoot applications, buyers should also consider surface temperature, drainage, wet-surface conditions and installation quality.

For pet and family projects, regular inspection and clean, well-finished edges remain important.

For B2B buyers, the best approach is to evaluate the complete product.

Check:

• Surface quality
• Board edges
• Profile structure
• Surface technology
• Joist spacing
• Installation gaps
• Relevant technical information
• Replacement options

The most accurate product message is not:

Composite decking can never splinter.

Instead:

Quality WPC composite decking provides strong resistance to traditional timber splintering and offers a relatively smooth, consistent surface for outdoor applications when correctly selected, installed and maintained.

Looking for Splinter-Resistant Composite Decking?

Senlai manufactures traditional, 3D embossed, hollow, solid and co-extruded WPC decking for distributors, contractors and outdoor projects.

Multiple surfaces, colors and profiles are available for residential, poolside, hospitality and commercial applications.